How to build a GoPro battery grip


So you wanna build a GoPro battery grip? Well you’ve come to the right place! Why pay £40 for an off the shelf battery and grip when you can make one yourself with 3x the battery life for less than half the price? You may already have some of the required parts so could work out even cheaper!


All these parts you need can be found on eBay:

I’ve made a video to show you guys how all the parts go together, it’s pretty straight forward.

Give it a go and let me know how it goes!


Where has everything gone?

Well it appears my blog and all its content has vanished!
If you’re looking for a particular post then please check back in a day or 2 when I will have hopefully restored everything from a backup.


2 problems, 2 solutions

Living in Bath can be a pain at times. For example, when owning a bike and living in a small flat (which is pretty much everywhere in Bath), where do you store your bike?

Outside? I didn’t want to leave my bike outside. Not only would it be at greater risk of being stolen but also at the mercy of the elements and would soon rust up no matter how well it was covered.

Communal hallway? This would obviously be the preferred option as there’s plenty of room here, especially tucked out of the way under the stairs. Unfortunately, someone had already tried that with their bike and got a polite “Leave your bike outside!” note from a neighbour!

So somewhere in the flat it is then. Bikes are bigger than I thought, with the wheels attached, but what if I take the wheels off? Boom!


The shelving unit is actually a modified IKEA wardrobe which now fits pretty perfectly into an otherwise awkward size cupboard.

However, removing the wheels from a bike with hydraulic brakes introduces another problem:
If someone pulls the brake levers while the rotor is not between the brake pads then the pads clamp shut meaning you can’t get the wheel back on! I’ve learnt this the hard way, twice.

My brother had just visited from Australia and left a 20 cent coin behind. This happened to be the exact same thickness of the disc brake rotor! So I stuck the coin between the brake pads and secured it in place with a bit of tape. Perfect! (A 2p coin is almost as good and was used on the rear brake).


Now my bike can sit happily in the cupboard without getting rusty, offending the neighbours or the pads clamping shut, all while making decent use of otherwise wasted space. Win win!